Yonda chair by Neunzig°design studio for Wilkhahn features oak legs and and injection moulded recycled polypropylene (rPP) top with 20% wood filler.

The Noho Move dining chair by Noho is injection moulded from Econyl recycled polyamide (rPA), nylon, along with recycled polypropylene (rPP). Image Econyl.

Oak plank stool, Original Coffee, Copenhagen.

Light Light Chair, designed by Alberto Meda for Alias, 1987, is manufactured with Nomex honeycomb core sandwiched between layers of unidirectional carbon fibre reinforced epoxy. Weight is c. 1 kg. Image Alberto Meda.

Ant chair, by Arne Jacobsen for Fritz Hansen, 1952, upholstered in wool

Gubi 3D veneer chair, by Komplot Design, with rotary-cut beech veneer core and American Black walnut surface layers

The seat of the original Eames Molded Fiberglass chairs, by Charles and Ray Eames for Herman Miller, 1950, was produced with glass fibre reinforced polyester resin

Lean Back chair, by Arne Hovmand Olsen for Warm Nordic, 1957, in solid teak
Relevant materials
Wool, Sheep wool

CH24 Wishbone Chair, designed by Hans J. Wegner for Carl Hansen & Søn, 1949, in oiled teak with natural paper cord seat

Basket lounge chair, by Jo Colombo for Gubi, in hand-woven rattan over a steel frame

Xbrick seat cube in expanded polypropylene (EPP), which uses texture and pattern on the surface to conceal to visual foam structure.

Easy chair, by Jerszy Seymour for Magis, 2004. Injection moulded glass fibre reinforced polypropylene (PP-GF20).

Easy chair, by Jerszy Seymour for Magis, 2004. Injection moulded glass fibre reinforced polypropylene (PP-GF20). The underside features a truss structure, which increases stiffness without adding much material.

Eames Plastic Armchair DAL, designed by Charles & Ray Eames for Vitra, 1950, features nylon hopsack woven fabric on a glass-fibre reinforced polypropylene (PP-GF) shell

Bit stool, by Simon Legald for Normann, in rotation moulded mixed colour recycled low-density polyethylene (LDPE)

C-Chair, by Marcel Gascoin for Gubi, in black oiled oak with paper cord seat and back

The Orange chair, by Hans Olsen for Warm Nordic, 1955, in smoke oiled oak

Colour Stool in maple wood by Scholten & Baijings for Karimoku New Standard, 2011. Photo by Takumi Ota for Scholten & Baijings.

Mahogany cladding and powder coated steel on coastal public seating.

A replica of Eero Saarinen’s iconic 1955 tulip-arm chair using Ekoa, a flax fibre reinforced bio-epoxy composite. Ekoa is suitable for processing via standard composite manufacturing techniques including wet lay-up, compression moulding, infusion and resin transfer moulding (RTM). Image Lingrove.

Salmon skin upholstery.

PK0 A chair, by Poul Kjærholm for Fritz Hansen, 1952, in laminated Douglas fir

Utrecht armchair, by Gerrit Thomas Rietveld for Cassina, 1935, consists of a steel frame, polyurethane padding and blanket stitched pigmented leather upholstery.

Eames Molded Plywood chair, by Charles and Ray Eames for Herman Miller, 1946, in press moulded birch veneers with hair-on cowhide upholstery.

Mosaic tiled seating installation by Noriyuki Otsuka, 2004, Japan

The Ydin burned wood edition stool, by Franck Divay of Inoow Design, combines Italcementi ultra high performance concrete (UHPC) with ash. The ash legs have been charred - Yakisugi, a traditional Japanese method of wood preservation using fire to burn wood - to turn them black and enhance their surface. Photo courtesy of Inoow Design.

Palissade outdoor furniture, by Ronan & Erwan Bouroullec for Hay, in galvanised and powder coated steel.

Hee chair, by Hee Welling for Hay, is produced from welded steel, which is galvanised (zinc) and powder coated with colour.

Hay Palissade Dining Bench by Ronan & Erwan Bouroullec, in galvanised steel.

Laminated and press-formed beech veneer chair seat, clear coated, filled with polyurethane resin (PUR) foam

Moulded beech veneer seat backs for the S43 chair, by Mart Stam for Thonet, 1931.

Steam bent beech seat backs for the Thonet No. 214.

Beech veneers, laminated and press-moulded into chair seat backs, ready for CNC trimming.

Gesture chair, by Hans Olsen for Warm Nordic, 1957, in painted beech

Laminated and press-formed beech veneer chair seat, clear coated, filled with polyurethane resin (PUR) foam

Superleggera chair, by Gio Ponti for Cassina, 1957, in lacquered ash. After years of design refinement the wood frame was paired down to a minimum weight of just 1.7 kg

CH24 Wishbone Chair, designed by Hans J. Wegner for Carl Hansen & Søn, 1949, in ash frame, painted black, with natural paper cord seat.

The Unrockable stool, designed by Hans Sandgren Jakobsen, 1999, features 35 turned ash sticks with a funnel-shaped top

Bellevie bench end piece (arm and back rest), by Pagnon & Pelhaître for Fermob, in welded and powder coated aluminium.

Trax airport seating, by Rodney Kinsman for OMK, 1989, features a self-skinning polyurethane resin (PUR) foam upholstery, cast and powder coated aluminium arms and an extruded aluminium beam

CH45 Rocking Chair, designed by Hans J. Wegner for Carl Hansen & Søn, 1965, in oiled and soaped white oak, with paper cord seat