Axial thrust disc produced from carbon fibre reinforced polyetheretherketone (PEEK-CF), CNC machines to precise tolerances. Compared to metal equivalents, it offers lightness, corrosion resistance and chemical resistance. Produced by 3P - Performance Plastics Products.

Exotech folding fins injection moulded in DuPont Hytrel thermoplastic elastomer (TPE-TPC). This version, called Eco-B, is equivalent in performance to those made from fossil feedstock, but with biomass content up to 72 % by weight. DuPont produces Hytrel Eco-B using a biomass balance approach certified by the ISCC+ (International Sustainability & Carbon Certification) standard.

Yacht racing sail, featuring unidirectional aramid and carbon fibres, laminated between thin films of biaxially oriented polyethylene terephthalate (BOPET), polyester. This combination produces an exceptionally lightweight sail capable of maintaining its flying shape even under extreme wind loads.

NRS paddle shoe. They are produced with Terraprene, a neoprene derived from limestone and recycled tyres. Other examples of neoprene made from limestone include Bioprene and Geoprene. Image NRS.

Boat towing and lifting cable (twisted wire), and forged shackle, produced with 316 stainless steel, suitable for long term exposure to salt water marine environment


Glass fibre and polypropylene woven fabric, consolidated with heat and vacuum pressure to form a tough and lightweight thermoplastic composite (PP-GF60). It is used in automotive, motorsport and marine applications.

Military boat hull, produced with glass fibre reinforced polypropylene (PP-GF60) thermoplastic composite. It is incredible tough and resilient for its weight - critical requirements for the front section of high speed landing craft

Injection moulded thermoplastic composite FCS H4 surf fin. It is produced by Svismold with unidirectional thermoplastic tape acting as skins, sandwiching a moulded thermoplastic core. With this technology, it is possible to combine several different types of fibre reinforcement and thermoplastic matrix, resulting in different levels of performance. This example is unidirectional carbon fibre and polycarbonate (PC-CF).

Injection moulded thermoplastic composite FCS H4 surf fin. It is produced by Svismold with unidirectional thermoplastic tape acting as skins, sandwiching a moulded thermoplastic core. With this technology, it is possible to combine several different types of fibre reinforcement and thermoplastic matrix, resulting in different levels of performance. This examples is unidirectional glass fibre and polyamide (PA-GF), nylon.

Injection moulded thermoplastic composite FCS H4 surf fin. It is produced by Svismold with unidirectional thermoplastic tape acting as skins, sandwiching a moulded thermoplastic core. With this technology, it is possible to combine several different types of fibre reinforcement and thermoplastic matrix, resulting in different levels of performance. This example is basalt fibre and polyamide (PA-BF), nylon.

Bergo Extreme interlocking floor tiles, injection moulded in UV-resistant polyamide (PA), nylon, offer slip resistance in areas such as passenger balconies, pool areas, laundry rooms, engine rooms and freezer rooms on yachts, ferries and cruise ships.

Mahogany cladding and powder coated steel on coastal public seating.

Nordea Christianshavn, Copenhagen, by Henning Larsen, completed 2000, features a copper facade that will slowly turn green over time as the copper develops its characteristic verdigris patina.

NEMO (National Center for Science and Technology), Amsterdam, by Renzo Piano, completed 1997. It is clad in green patinated copper. The process of patination is very slow, taking many years to become green and only if the conditions are right. So, the copper is pre-patinated using a chemical process to give the hardwearing and weather resistant layer on the surface a head start prior to installation.

Futures HS 4.20 Generation Series designed by Hayden Cox. A mix of materials is used to create the ultimate ride performance. Carbon fibre and glass fibre are used in combination with a nonwoven polyethylene terephthalate (PET), polyester, honeycomb shaped core material. Epoxy resin is infused into the materials under vacuum. The honeycomb has very low resin uptake and saves around one-third of the weight compared to solid laminate.

Pre-preg carbon fibre textile (impregnated with epoxy resin). The protective release film is removed in preparation for laminating.

Dock mooring cleat, in die cast aluminium 535 (almag 35), an aluminium-magnesium alloy with very good resistance to corrosion, in particular salt water marine environments

Dalian International Conference Center, China, by Coop Himmelb(l)au, completed 2012, features Novelis coil-anodised aluminium cladding, which provides enhanced protection from the marine environment