Polyamide fibre (PA)
2.5-8.5 usd/kgAs well as being utilised in 100% polyamide (PA) nylon fabrics, it is blended with cotton and viscose, for example, to take advantage of its properties at a lower price point. It also is blended with wool to enhance strength, resilience and wear resistance. These blends are used a great deal in fashion textiles, such as to make outdoor wear, sportswear, swimwear, dresses, suits and lingerie.
As well as being available as a conventional petrochemical product, PA6, PA66 and PA11 fibres are available as bioplastics, derived from castor oil (bio-PA). Sourced responsibly, these bio-based plastics provide a renewable alternative to conventional synthetic fibres. In addition, grades exist that are designed to biodegrade in landfill and marine environments. For example, Nurel Neride Bio PA6 and Solvay Amni Soul Eco PA66. While they are not compostable and decompose much slower than biodegradable polyesters, they reduce the impact of microplastics because they breakdown more quickly than a regular synthetic. However, methane is produced as a result of its decomposition, as with all biological matter, which must be managed properly to avoid it negative impacts as a potent greenhouse gas (GHG).
As with moulded nylon, and other thermoplastic fibres, it can be welded, and formed into 3D shapes with heat and pressure (such as embossing patterns, or heat setting to improve the fit of a garment). A huge range of finishes and colours are possible. Nylon is produced as glossy, or dull, and in a range of cross-sections, which may be solid or hollow. For example, trilobal nylon, produced with a triangular cross-section, produces a more lustrous finish (silk-like) and changes the handle (feel) of a fabric.
Metal coatings are used to enhance surface properties by improving reflectivity, wear resistance and corrosion resistance. For example, nylon is coated with antimicrobial silver, or highly conductive copper or nickel for shielding or wearable electronics. Alternatively, it is laminated with aluminium metallised film, such as to create metallic stretch fabric.
As well as textiles for fashion and sports, nylon fibre is used in the production of thermoplastic composites. Reinforced with glass fibre or carbon fibre, they combine the advantages of both as high impact and high strength materials. Applications span automotive, engineering and sports equipment.
Search similar materials
Find better material
Sustainability concerns


Econyl is a recycled PA6 nylon, manufactured by Aquafil. Unlike conventional thermoplastic recycling, which re-melts the polymer, Aquafil regenerate new polyamide from monomer extracted from nylon waste. This means it is like new and the process can be repeated in a closed loop cycle without any loss of quality. This is unlike melt-processing, which gradually breaks down the polymer chains with each recycling cycle, a bit like paper recycling.
Suitable waste includes fishing nets, carpets, post consumer garments and pre-consumer manufacturing waste. It is a little more expensive than virgin nylon, due to the scale of operations and processes involved, and has higher energy requirements than simple melt-processing, but offers a closed loop solution for many textile applications, including garments, fashion, interiors, carpets, automotive and furniture.