Circularity potential
High
Strength
High
Production energy
Low
Stiffness
Medium
Embodied CO2
Low
Density
Low

Pineapple (Ananas comosus) leaf fibres, sometimes abbreviated as PALF, are a by-product of pineapple cultivation for food. They have great potential for many applications, but have not been exploited commercially in the same way as bast fibres such as hemp, flax (linen) and jute. As a result, there is not much data available, so some assumptions have been made, based on similar materials, to give an indication of the mechanical properties and environmental impacts of this fibre.

While the fibre holds a lot of promise for fashion, textiles, composite reinforcement and automotive applications, pineapple farming is not particularly ethical or sustainable. Plant fibres are a renewable resource that are biodegradable and have many physical and mechanical qualities that make them a desirable alternative to synthetics. In addition, the leaves and other waste are often burnt or left at the production site, and only a small amount goes to composting or animal feed.

However, plantations are responsible for the destruction of rainforest and large quantities of chemical pesticides and fertilisers are required for the monoculture crop to be productive. Even so, their carbon footprint is relatively low compared to some other less productive foods, at around 0.02 kgCO2e/kg. Most of this is attributed to the use of pesticide and fertiliser.

The pineapple plant is native to Brazil and cultivation has gradually spread to other tropical parts of the world. Today, the largest producers are Thailand, Philippines, Brazil, China, India, Nigeria, Mexico and Indonesia.



Pineapple fibre, also called piña in the Philippines where it holds luxury status, has a silk like appearance, with beautiful nature lustre. Naturally off-white, it is can be dyed, but tends to be used in its original colour. It is 60-80% cellulose, which is more than your typical bast fibre. This gives it a relative lightness, good water absorption properties, softness and drape.

The fibre is extracted from the leaves that are left behind after the harvest. They are collected in bundles and the fibres separated by hand or with semi-automated decorticating machines. They are washed and dried, and spun into yarn. It can provide a valuable second income for farmers.

The processes are labour intensive and this makes piña a relatively expensive fibre, especially for fine yarn with long fibres. As a result, its use tends to be limited to things like ceremonial garments, tablecloths and handkerchiefs.


Design properties
Cost usd/kg
5-25
Embodied energy MJ/kg
3.4-22
Carbon footprint kgCO2e/kg
0.1-1
Density kg/m3
880-1070
Tensile modulus GPa
24-50
Tensile strength MPa
140-220
Hardness Mohs
1
Temperature min-max °C
-40 to 120
Thermal
insulator
Electrical
insulator